Ink type : Urethane based two-part isocyanate hardening inks.
Usage : Applicable on hard-coated acrylic surface(such as MR200 manufactured by Mitsubishi RAYON)
Feature : Excellent leveling properties, semi-gloss finish, outstanding rub-resistance.
Diluents : Standard solvent : T-926,T-945
Slow dry solvent : T-927
Retarder : T-980
Hardener : N hardener, standard hardener, used in regular circumstance
D hardener, use to improve rub-resistance.
Mixing ratios: Ink: Hardener =100:10
Gel phenomena may occur after 6-8 hours of usage at room temperature after mixing,
leading to Reduced physical performance.
Wash-up : T-31/T-15
Screen mesh: 200-300 mesh / inch polyester or Nylon screens is recommended.
Drying time : Air drying: sets to touch in 40minutes at 20℃.
Thermal curing: 30minutes at 80℃+1day air-drying.
Notes : N-hardener is extremely sensitive to moisture， please use as soon as possible after opening.
Rate of evaporation has been reduced to improve printability, thermal curing is recommended.
During multi-layer printing, it is recommended for previous layers to be set to touch dry,
and hard-dried after all procedures are completed to prevent peeling.
Color code for HF BMR-S Series.
Ink Layer performance.
Test Conditions
Ink : HF BMR-S 120 White, 710 BLACK
Drying : 30minutes at 60℃ and air –drying for 1 day.
Material: MR200
