Ink type: Quickly-drying, two-part reaction inks using an isocyanate hardener
Usage: Treated PP and PE coats (especially urethane coats), ABS, Acrylic, PVC, Nylon cloths, etc.
Finish: Generally semi-gloss finish plus solvent-resistance film, although the quality varies slightly with the color.
Drying time: Air drying or Thermal curing.
Sets to touch in 30 minutes at room temperature( 25℃); 5 minutes by thermal curing at 60℃.
Hard dry in 4 days at room temperature, 20 minutes by thermal curing at 80℃.
Mixing ratios: Add hardener (transparent) to main agent (colored) at the ratio of 1:10, and agitate them well
before use.
Use within the pot life of 6-8 hours, after which the mixture will turn to gel or loss its designed
physical properties.
Pot life may vary based on environmental sectors.
Diluents: Use the following types of solvents (10-15% weight) to adjust viscosity;
Standard solvent(T-926),
Slow dry solvent (T-927),
Retarder (T-980).
Wash-up: Use T-15 for economical wash up.
Notes: VIC series hardener is very sensitive to humidity, so, VIC inks should be used as soon as possible
after opening.
After the addition of gold metallic powder, a reaction will occur that causes the inks to gel rapidly.
The inks should not be used in cases of such reaction. |
