Type
Special resin / 2part-reaction air dying system/ halogen free.
Usage
Reverse printing on the plastic materials to get mirror effect appearance.
Feature
Excellent mirror finish by using high brightness special aluminum flake.
Excellent adhesion to hard-coated acrylic (ex.mp200)
Diluents
Standard T-477
Normally, it is not required but only use it to restore to the viscosity to original condition.
Screen mesh
Polyester/Nylon 250~300 mesh/inch fabric and squeeze hardness 80 durometer is recommended.
Drying
Drying at room temperature and then forced drying 70℃Х30 minutes is recommended.
Wash-up
T-15/T-31
Others
•Printing conditions such as emulsion thickness, screen mesh size, drying condition, etc are important factors to get the original performance. It influences the brightness and printing finish.
•HAC/BMR series or GAP series (with up to 10% N-HARDENER) are suitable for BACK UP inks
•Check the adhesion and printing finish on the substrate before printing due to variation with time. |
